IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.1p Priority (Quality of Service [QoS])
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1Q Tagged VLAN
IEEE 802.3x Flow Control
IEEE 802.1x Access Control
12 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port plus
2 – Dual Media 10/100/1000BaseT/TX ports with 1000Base SFP ports.
Multicast/Broadcast/Unknown-Unicast Storm suppression enabled.
Per Switch: Power Status 1, 2, & 3
Per Port: Link/Activity, 10/100 or 10/100/1000 speed
Latency: <4.5 μs (LIFO).
Throughput, per port: 1.48810 million pps (64-byte packets)
Switch Fabric Speed: 8.0 Gbps (non-blocking, wire speed performance)
MAC Address Capacity: 8K; Per-port programmable MAC address locking up to 24 Static Secure MAC addresses per port
Frame Buffer: 2 MB
Port Mirroring: Inbound and Outbound, assignable to any port.
IEEE 802.1x Access Control.
- INTERNETWORKING PROTOCOLS SUPPORTED
MAC-based Trunking: 2 Fast Ethernet +1 Gigabit Ethernet trunking groups; up to 4 ports for each group
GARP VLAN Registration Protocol / Generic Attribute Registration Protocol: IEEE 802.1Q with GVRP/ GARP
Multicasting: Supports IP Multicast Filtering via IGMP Snooping V1, V2 & V3
Spanning Tree Protocol / Rapid Spanning Tree /Multiple Spanning Tree Protocol: IEEE 802.1d/1w/1s
Recover-Ring™: Supports recovery of ring-based network architecture in <15 ms. Proprietary
Port-based VLAN; IEEE 802.1Q Tag-based VLAN; up to 4K active VLANs possible
Supports 802.1p QoS with four level priority queue.
Supports two scheduling types, Strict Priority and Weighted Round Robin (WRR) with user-variable weighting.
Supports bandwidth rate limiting
Ingress and Egress rate limits:
Ports 1-12: 64 Kbps up to 100 Mbps
Ports 13 & 14: 64 Kbps up to 1000 Mbps
Access Methods: Console port access via RS-232C/DB-9 local console serial port, Telnet remote access, SNMP agent, or Web browser.
Software Upgrade Capability: Via TFTP
SNMP v1, v2c, and v3 Network Management
RFC 1213 MIB (MIB-2)
RFC 1757 RMON MIB
Statistics Group 1
History Group 2
Alarm Group 3
Event Group 9
RFC 1493 Bridge MIB
VLAN MIB (IEEE802.1Q/RFC2674)
Private MIB
- ELECTRICAL CHARACTERISTICS
DC Input Range: 12 to 48 V DC Connected via Redundant Terminal Block
- ENVIRONMENTAL CHARACTERISTICS
Operating Temperature: -40°F to 167°F (-40°C to 75°C)
Tested to: -40°F to 185°F (-40°C to 85°C)
Storage Temperature: -40°F to 185°F (-40°C to 85°C)
Operating Humidity: 5% to 95% (non-condensing)
- PHYSICAL CHARACTERISTICS:
Dimensions: 9.25” W x 4.92” D x 1.97” H (235 mm x 125 mm x 50 mm)
Housing: IP30 protection, metal case.
Weight: 3.74 lb (1.7 kg)
CE
NEMA TS1/2 Environmental requirements for traffic control equipment
Safety: UL508, EN60950-1, IEC 60950-1
EMI: FCC; EN61000-6-3; EN55022; EN61000-3-2; EN61000-3-3
EMS: ESD Standards (EN61000-4-2); Radiated RFI Standards (IEC 61000-4-3); Burst Standards (IEC 61000-4-4); Surge Standards (IEC 61000-4-5); Induced RFI Standards (IEC 61000-4-6); Magnetic Field Standards (IEC 61000-4-8); Voltage Dip Standards (IEC 61000-4-11)
Environmental Test Compliance: Vibration Resistance (IEC 60068-2-6 Fc); Operation/Storage/Transport Shock (IEC 60068-2-27 Ea); Free Fall (IEC 60068-2-32 Ed)
Five Years
