West Penn Wire - Cable Connectors & Accessories / Assemblies | Patchcords / Flexible Audio & DMX Assemblies / All Products

WP-810BMBM-xx

Wed, 17 Jul 2019 08:16:40 GMT

Product Description	RG8 50Ohm Assemblies Non Plenum
Product Overview	West Penn Wire 50 Ohm Coaxial assemblies are designed for RF & Wireless Microphone Applications. The Cable offers 12AWG Stranded Bare Copper Center Conductor, Foamed PE insulation and a 100% Aluminum Foil + 95% Tinned Copper Braid. The Connector used is a 50Ohm BNC Male Plug.
Package Qty.	1

Features

• Transmission performance 4GHZ

• UL Certified Cable CMR Rating

• 100% factory transmission tested

• BNC Compression Rating Return Loss: Up to 2.4GHz

• Ultra Flex Design

Lengths: 50, 75, 100, 125, 150, 175, 200, 225, 250

WP-810MBM-xxx

Replace xxx: 50, 75, 100, 125, 150, 175, 200, 225, 250

Visit Flexible Audio & DMX Assemblies to see additional products in this category.

CN-DMXFLEX3-xx

Tue, 16 Jul 2019 12:23:25 GMT

CN-DMXFLEX3-xx
Buy Now: $57.85

A braided copper shield and a natural cotton filler results in a cable that is extremely durable, while remaining easy to handle and comfortable to coil.Lays flat and has no memory. Coils like a dream22 AWG stranded tinned copper
Polyethylene insulation
110 ohm low capacitance
100% Braided shield
Male connector with improved locking recess without "window", more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc die cast shell, long lasting and dependable
Internal thread on shell is well protected against any damage
Branded with unique hologram - guarantees genuine and authentic Neutrik product

3 Pin XLR M to F.

Visit Flexible Audio & DMX Assemblies to see additional products in this category.

CN-CSM2XMF-xx

Thu, 2 May 2019 08:45:41 GMT

CN-CSM2XMF-xx
Buy Now: $44.10

Download Data Sheet

CABLE CONSTRUCTION

The CSM2 cable is designed from the inside out to be the finest stage and tour grade cable available. Every component of the cable itself is carefully chosen with the end goal of creating a tough, flexible, and dead-quiet microphone cable. It’s not an ordinary cable. Here’s a closer look:

Inner Conductors:

The two primary stranded inner conductors each have 20 strands of 0.12 bare copper. While many cable companies will lower cost by using inferior materials here (like aluminum with a copper coating), Elite Core CSM is pure, from the inside out. And you can hear the difference.

Inner Conductor Insulators

The insulator that was chosen to separate the two inner conductor cores is Polyethylene, or PE. This insulator is a part of a class of polymers known as polyolefins. We chose PE over the less expensive old-fashioned PVC because it has the lowest dielectric loss and highest initial dielectric strength of all thermoplastic insulators. PVC would have been cheaper. We weren’t trying to build the world’s cheapest cable, we set out to build the best. XLPE, while it is more resistant to high heat, has more dielectric loss than PE. With careful attention to our selection of soldering equipment and the temperature and methods used to solder, the PE was the obvious choice because of its extremely low dielectric loss characteristic. The PE is firm, strips well, and maintains a constant diameter with ease. We selected a red and a white color for the two insulators.

Conductive PE Layer:

The magic of the CSM2 cable is found on the outside of the red and black inner cores. It’s a refined thin layer of conductive PE. Yes, that’s right, it’s a layer of thermoplastic polyethylene that has been precisely blended with carbon fiber to create a conductive layer that is perfectly snug around the red and white inner cores. This layer is key to the CSM2 cable. These days, there is an extreme amount wireless noise (from wireless mics, IEM transmitters, wireless DMX devices), electromagnetic noise (from power cables, lighting ballasts and moving light motors), and just plain abuse (from people and casters!) in the world of entertainment sound, lighting and video. The CSM2 cable provides an extra layer of shielding with the conductive PE. This layer serves three purposes. When selecting your cable, it’s important to consider whether these three issues are some that you deal with.

(1) Immunity from outside EMI and RF interference. Since the PE is conductive, it provides an additional layer of shielding from RF and EMI noise that is being emitted from many sources on all stages. If your stage has wireless sources or electricity, this is critical.

(2) Containment of any EMI transmission that your signal may emit. The days of microphone cables only carrying natural voices or analog instruments are long since over and gone. Today’s production stages are full of tracks, clicks, loops, and many other loud and potentially troublesome signals. It’s important to keep those signals to themselves. The conductive PE on our CSM2 cable does just that. If you’re anything but an all-natural bluegrass band, this is critical.

(3) Discharge of piezoelectric static and noise. When a mic cable gets knocked around by an active vocalist, or stepped on by an active stage hand, something troubling happens. There is a triboelectric effect that occurs when the insulators are pressed and misshaped, that causes a slapping, or thumping noise. This causes a piezoelectric discharge that ultimately functions as a crude transducer. Granted, the signal level is very low and the resulting noise is very minute, but this noise can still cause problems because it is intensely amplified once it reaches the preamp in the mixer. The layer of conductive PE we have added serves to drain off this static and eliminate the potential of handling noise. The net result is a dead quiet cable. If you have humans using your mics and cables, this is critical for your application.

The Conductive PE layer is black. When initially stripping back the cable, it appears that both conductors are black. The red and white PE insulators are under the black layer of conductive PE. Please note that since it’s conductive, it must be stripped back a bit prior to soldering. Finally, it’s important to note that while PVC is cheaper than PE, we chose PE because it is the best choice. There are plenty of cheap cables on the market. We wanted to build the best.

Soft Cotton Stranded Filler:

To create the soft, pleasing feel of the CSM2 cable, we chose a natural cotton filler to round out the interior of the cable. It feels right, coils the way you want it to, and is pleasant to handle.

Helical Bare Copper Shield

The primary helical shield is provided by 80 strands of 0.1 the highest quality bare copper. It’s soft, flexible, and effective in shielding from EMI and RF noise. With the combination of this quality spiraled shield plus the two conductive PE coatings on the inner conductors, the CSM2 is the perfect cable for today’s active and noisy stages. The sounds and signals you want to stay inside are contained, and the noise and interference that you want to keep out is reflected away from your precious audio.

Outer Jacket:

The outer jacket of the CSM2 cable is opaque black PVC with an outside diameter of 6.5mm. PVC is the perfect material for this application because it holds its shape well and has great abrasion resistance. It’s easy to clean and comfortable to coil.

Visit Flexible Audio & DMX Assemblies to see additional products in this category.

CN-CSM4XMF-xx

Thu, 2 May 2019 08:21:33 GMT

CN-CSM4XMF-xx
Buy Now: $63.86

Download Data Sheet

Cable Construction:

The CSM4 quad conductor cable is designed from the inside out to be the finest studio and stage grade cable available. Every component of the cable itself is carefully chosen with the end goal of creating a tough, flexible, and dead-quiet microphone cable. It’s not an ordinary cable. Here’s a closer look:

Inner Conductors:

There are four cores that are very tightly twisted with a very short lay length. Each core is constructed of 26 strands of .1 pure bare copper. These conductors are transparent, precise, and extremely flexible. The high twist rate of these four conductors around each other results in dramatically improved rejection of electromagnetic interference when compared to standard two‑conductor mic cables. In some cases, the noise reduction could be up to 20db.

Inner Conductor Insulators:

The insulator that was chosen to separate the four inner conductor cores is cross linked polyethylene, or XLPE . This insulator is a thermosetting compound made from a polymer resin that has been irreversibly cured to form a special type of insulator that is less prone to shrinking when heated. We chose XLPE over the less expensive old-fashioned PVC because it has much lower dielectric loss and, despite its smaller diameter, is easier to solder without shrinkage. PVC certainly would have been cheaper. We weren’t trying to build the world’s cheapest cable, we set out to build the best. With careful attention to our selection of soldering equipment and the temperature and methods used to solder, the XLPE was the obvious choice for our quad conductor CSM4. We selected two blue and two white for the four insulators.

Soft Cotton Stranded Filler:

To create the soft, pleasing feel of the CSM4 cable, we chose a natural cotton filler to round out the interior of the cable. It feels right, coils the way you want it to, and is pleasant to handle. Surrounding the four inner conductors and cotton fibers is a tissue wrap that enables the cable to coil easily and be exceptionally manageable.

Braided Copper Shield:

The full braided outer shield is constructed of a sophisticated matrix of tinned copper. Sixteen individual sections of 8*.1 strands are carefully braided to form an effective barrier against RF and EMI noise. It’s soft, flexible, and effective in shielding from just about anything that might try to enter. With the combination of this quality braided shield plus the effectiveness of the quad spiral internal conductors, the CSM4 is the perfect cable for today’s active and noisy stages and studios. The sounds and signals you want to stay inside are contained, and the noise and interference that you want to keep out is reflected away from your precious audio.

Outer Jacket:

The outer jacket of the CSM4 cable is opaque black Non-Metallic PVC with an outside diameter of 6.0 mm. PVC is the perfect material for this application because it holds its shape well and has great abrasion resistance. It’s easy to clean and comfortable to coil.

Visit Flexible Audio & DMX Assemblies to see additional products in this category.

CN-DMXFLEX5-xx

Thu, 2 May 2019 08:00:26 GMT

CN-DMXFLEX5-xx
Buy Now: $92.89

Premium Hand-Built 5-Pin DMX Cable

Download Data Sheet

The CN-DMXFLEX cable is designed from the inside out to be the finest stage and tour grade DMX cable available. Every component of the cable itself is carefully chosen with the end goal of creating a tough, flexible, and interference free DMX cable.

CABLE CONSTRUCTION

Inner Conductors:

The four primary stranded inner conductors each have 20 strands of 0.12 bare copper. While many cable companies will lower cost by using inferior materials here (like aluminum with a copper coating), Elite Core CSD is pure, from the inside out.

Soft Cotton Stranded Filler:

To create the soft, pleasing feel of the CSD5 cable, we chose a natural cotton filler to round out the interior of the cable. It feels right, coils the way you want it to, and is pleasant to handle.

Braided Shield

The primary Braided shield provides an extra layer of ruggedness. It’s effective in shielding from EMI and RF interference.

Outer Jacket:

The outer jacket of the CSD5 cable is opaque black PVC with an outside diameter of 7.6mm. PVC is the perfect material for this application because it holds its shape well and has great abrasion resistance. It’s easy to clean and comfortable to coil.

Visit Flexible Audio & DMX Assemblies to see additional products in this category.

WP-807BMBM-xx

Tue, 20 Dec 2016 10:22:00 GMT

WP-807BMBM-xx
Buy Now: $66.95

Product Description	RG8X 50Ohm Assemblies Non-Plenum
Product Overview	West Penn Wire 50 Ohm Coaxial assemblies are designed for RF & Wireless Microphone Applications. The Cable offers 16AWG Stranded Bare Copper Center Conductor, Foamed PE insulation and a 100% Aluminum Foil + 90% Tinned Copper Braid. The Connector used is a 50Ohm BNC Male Plug.
Package Qty.	1

Features

• Transmission performance 1GHZ

• UL Certified Cable CMR Rating

• 100% factory transmission tested

• BNC Compression Rating Return Loss: Up to 1GHz

• Ultra Flex Design

Lengths: 10, 15, 20, 25, 35, 50, 75, 100, 125, 150 feet

WP-807MBM-xxx

Replace xxx: 10, 15, 20, 25, 35, 50, 75, 100, 125, 150

Visit Flexible Audio & DMX Assemblies to see additional products in this category.