| OUTPUT |
DC VOLTAGE |
48V |
| RATED CURRENT |
2.5A |
| CURRENT RANGE |
0 ~ 2.5A |
| RATED POWER |
120W |
| RIPPLE & NOISE (max.) Note.2 |
100mVp-p |
| VOLTAGE ADJ. RANGE |
48 ~ 53V |
| VOLTAGE TOLERANCE Note.3 |
±1.0% |
| LINE REGULATION |
±0.5% |
| LOAD REGULATION |
±1.0% |
| SETUP, RISE TIME |
500ms, 70ms/230VAC 500ms, 70ms/115VAC at full load |
| HOLD UP TIME (Typ.) |
36ms/230VAC 32ms/115VAC at full load |
| INPUT |
VOLTAGE RANGE |
88 ~ 132VAC/176 ~ 264VAC by switch 248 ~ 370VDC |
| FREQUENCY RANGE |
47 ~ 63Hz |
| EFFICIENCY (Typ.) |
0.85 |
| AC CURRENT (Typ.) |
2.6A/115VAC 1.6A/230VAC |
| INRUSH CURRENT (Typ.) |
COLD START 20A/115VAC 40A/230VAC |
| LEAKAGE CURRENT |
<3.5mA / 240VAC |
| PROTECTION |
OVERLOAD |
105 ~ 150% rated output power |
|
Protection type : Constant current limiting, recovers automatically after fault condition is removed |
| OVER VOLTAGE |
58 ~ 65V |
|
Protection type : Shut down o/p voltage, re-power on to recover |
| OVER TEMPERATURE |
90℃±5℃(TSW1) |
|
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down |
| ENVIRONMENT |
WORKING TEMP. |
-10 ~ +60℃ (Refer to "Derating Curve") |
| WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY |
-20 ~ +85℃, 10 ~ 95% RH |
| TEMP. COEFFICIENT |
±0.03%/℃ (0 ~ 50℃) |
| VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
SAFETY & EMC
(Note 4) |
SAFETY STANDARDS |
UL508, UL60950-1, TUV EN60950-1 approved |
| WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
| EMC EMISSION |
Compliance to EN55011,EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
| EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A |
| OTHERS |
MTBF |
432.1Khrs min. MIL-HDBK-217F (25℃) |
| DIMENSION |
65.5*125.2*100mm (W*H*D) |
| PACKING |
0.79Kg; 20pcs/16.5Kg/1.29CUFT |
